CONGRATULATIONS!
Congratulations on your recent purchase of the Brutus Edition Ace Line
Hauler. This line hauler will provide you with years of service as long as
you follow these simple guidelines:
- Never submerge your line hauler under water.
- Never overload your line hauler.
FEATURES
100lb crab or prawn trap capacity.
Heavy-duty aluminum and stainless steel construction.
Draws 11 amps of power.
Pulls 1-4 crab or prawn traps.
120 f.p.m. (feet per minute) * Based on 1 trap per line. Multiple traps per line
result in lower speed.
45 3-minute pulls per fully charged deep cycle battery.
SET-UP AND OPERATION
- Remove wing nut from bolt attaching arm to unit in collapsed position.
Insert arm Into opening of frame. Attach to frame using bolt and wing nut.
(Note: Lubricant may be used on joint between frame end arm to ease
disassembly.)
- Mount your Ace Line Hauler to a standard Scotty™ Downrigger Mount (No.
1023) with the mounting pin and hair pin provided.
- To start motor, plug your Ace Line Hauler Into a standard Scotty™
Electrical Socket (No. 1126). A standard 30-amp Scotty™ fuse is sufficient.
- Feed trap line through pulley system as shown in diagram below.
- Pulling in traps requires light assist. Simply apply downward pressure
to rope until trap reaches the Surface.
- Unplug to turn motor off.
* KEEP HANDS CLEAR OF PULLEYS WHILE IN USE. *
